ASPIRE PAVERS

A beautiful, long-lasting surface–installed in half the time

The look of premium stone with a lighter, stronger, and more sustainable design.

Installs 60% faster with a simple interlocking grid that needs no mortar or adhesives

Half the weight of concrete but strong enough for vehicles, patios, and rooftops

Zero upkeep with a non-porous surface that resists stains, scratches, and cracks

LIFETIME NO-CRACK GUARANTEE

Get a quote

The fastest way to resurface your cracked surface

Lightweight and Easy to Handle

Weighing a third of traditional concrete pavers, Aspire Pavers are easier to transport and install without extra labor or equipment.

Winter-Ready and
Ice-Resistant

Aspire Pavers won’t crack, warp, or absorb water, even after 52 freeze-thaw cycles. The non-porous surface resists de-icers and stays slip-resistant, making winter maintenance effortless.

Stain & Scratch
Resistant

The non-porous composite surface repels spills like oil, wine, and grease—no sealing required.
Drag furniture across without worry—no scratches, no damage, just a flawless finish.

Installs in Half the Time

Patented interlocking grid system makes installation 60% faster than concrete pavers.

Guaranteed to last a life time

High-performance composite materials resists cracks, stains, and fading.

Comfortable Underfoot

Made from recycled rubber and plastic, Aspire Pavers are softer and quieter than concrete.

13 different colors. Endless Design Possibilities.

Boardwalk

Olive

Redwood

WaterWheel

Beverly Hills

Burnt Umber

Charcoal

Deep Sea

Ivory

Monstera

Moss

Obsidian

Red Rock

Get a Quote

Paver Components

8” x 8” Pavers on Grid

4” x 8” Pavers on Grid

4” x 4” Pavers on Grid

16” x 16” Pavers on Grid

Bullnose Paver

Elongated Bullnose Paver w/ Legs

Bullnose Corner Paver

Transition Paver

Transition Corner Paver

Drain Sheet

Paver Grid

Where Aspire Pavers Works Best

Specifications

Paver(s)

4"x4", 4"x8", 8"x8", 16"x16"

Pavers & Grid

16"x16"

Combined Height

1.75”

Weight (per unit)

12 lbs. (6.74 lbs/sq.ft)

Coverage

Square Feet (per Unit)

1.78 sq. ft.

Transition

Bullnose with Tabs

Bullnose with Legs

Quantity

180 units (approx. 320 sq. ft.)

Weight

Approx. 2,210 lbs.

Compressive Strength

ASTM C140-09 Section 7 Peak Comp. Strength: >2000 psi (Note: in “bound” configuration)

Flexural Strength

ASTM C140-09 Annex A6 Ult. Flex. Strength: 695 psi (SD: 35 psi) Flexural Modulus: 3842 psi (SD: 380 psi)

Coefficient of Friction

ASTM C1028-07 (Neolite pad), Dry(Static): 0.99, Wet(Static): 0.67 | ASTM D2394-05e1 (leather sole), Dry(Static): 0.57 Dry(Sliding): 0.46, Wet(Static): 0.94 Wet(Sliding): 0.86

Coefficient of Thermal Expansion

44*10^(-6) at 68ºF

Flame Spread Intermittent / Flame Burning Brand

UL 94 Section 7 - Material Test: Horizontal burning rate: 51 mm/min (2.0 in/min) | Note: A chemical shall be considered a flammable solid if, when tested by the method described in 16 CFR 1500.44, it ignites and burns with a self-sustained flame at a rate greater than one-tenth of an inch per second (6.0 in/min) along its major axis. Testing via UL 94 Section 7, Aspire has observed a flame spread rate that is roughly one-third the limit recognized by the Code of Federal Regulations. ASTM E108-007 (tested at1/2”:12” slope) Class “C”(Laboratory results only; UL 94 Section 7 ; test performed on equivalent product; slight variations in test results may result)

Cold Water Absorption

ASTM C67 Section 8 - Material Test PASS: <1% by mass, average saturation coefficient (after 1 hour boil): 0.05

Freeze-Thaw Cycling

ASTM C67 Section 9 - Material Test PASS: freeze-thaw cycled 52 times over 75 days. No visual signs of cracking, warping or crazing.

Chemical Resistance

No visual discoloration after 30 day exposure to household bleach or muriatic acid. No known discoloration due to exposure to road/deicing salt (sodium chloride or magnesium chloride), engine oil, grease, and common household cleaners.

Infiltration Rate

Not Tested